Level 15 Methanol Engine Gas Powered Model Car Water-cooled Cooling Accessories Kit (Only Water Cooling Accessories, No engine)

Level 15 Methanol Engine Gas Powered Model Car Water-cooled Cooling Accessories Kit (Only Water Cooling Accessories, No engine)

Features:

.Level 18 methanol engine water-cooled conversion accessories kit could be used for engine with flat water-cooled heat sink, installation screws, installation plate. Customized special size for be installed directly

.Size of Water Tank: 105 x 82 x 20mm (H x W x T), a total thickness with fan is 37mm; Dimensions of pressure relief water tank: 68mm long, 42mm thick, 5mm thick inlet and outlet nozzle

.Function: By using the principle of thermal expansion and cold contraction, the engine heats up and the whole circulation system expands with heat, and the pressure can be released through the pressure relief tank, and the circulating water flow can be seen at the same time

.Water Cooling Principle: The engine cylinder head will generate heat. Circulating water through the electric pump, the water-cooled heat sink will bring hot water to the cooling water tank, and the heat will be removed through the fan, thus reducing the temperature of the engine, reducing engine wear, and extending the service life

.Notes: Battery voltage 7-12v can be used, and this kit is equipped with 2S 7.4v lithium battery (please note that do not over discharge when using and cut-off voltage should not be lower than 3.6v, and low-voltage alarm is recommended). Because the joint thickness is not the same, there are 2 kinds of delivery pipe, connected by yourselves is required

.Warm Tips: This water-cooling kit is a DIY refit accessory kit, and it needs to be assembled by yourself. It requires a certain ability of operation, please place order carefully.

.For Crowd: For 14+

Specifications:

.Color: As Shown
.Material: Metal
.Product Weight: 600g
.Package Dimensions: 18 x 10 x 12cm
.Package Weight: 700g
.Packing: Box

Package Content:

.1Set x Water Cooling Accessories